Critical Process Died Windows 11 (Fixed)

So you’ve installed Windows 11 and your computer seems to be running fine. Everything works great, the software is responding as expected. Then it happens: your computer crashes with the error say critical process died. It happens more often than you would like it to, and when it does, you feel helpless. But it’s not your fault to be going through all this.

In this article, we will be going through ways and steps you can follow to Fix the “Critical Process Died Windows 11″ error.

So, let’s get started:

How to Fix Critical Process Died Windows 11

Learn how to fix critical process died in Windows 11 like a pro here by reading our guide.

Ways to Fix the BSOD stop code: Critical Process Died in Windows 11:

Using Safe Mode

Using Safe Mode, you can reset all your system settings back to their original default state. Once done with it, Windows will be in a “Safe Mode” where the actual driver issues are still present and wake up once booted into regular mode thereafter.

Start the system by pressing the power button, then wait for Windows to boot. While the system is booting, long press the power button to turn it off. After you have repeated the same process three times, the computer will enter into ‘Automatic Repair Mode’, and the screen will read ‘Preparing Automatic Repair’.

In order to resolve the issue that prevents Windows from booting, the system will now perform a diagnosis.

Your screen will likely look something like this. To proceed, click Advanced Options.

In the ‘Recovery Environment’, you will see three options on the screen, select ‘Troubleshoot’.

After that, click on ‘Advanced options’ as shown below.

Next Choose ‘Startup Settings’ from the six options on the ‘Advanced options’ screen.

Now you can pick from a list of Windows startup options. For now, click on ‘Restart’.

When the system restarts, press the ‘Safe Mode’ key that is designated for Safe Mode and press it. Press 4/5/6 corresponding type to boot Windows 11 into safe mode.

After booting into safe mode try the following:

Clean the RAM:

Clean the RAM of any dust or unwanted particles lying around. In case there are serious system crashes, it may have something to do with the RAM because the cache files of the operating system and software apps lie within this hardware.

Check for Loose connection:

Check the hard drive and other hardware components for a while and observe if there are any loose connections. If you find any rectify it as you go. If you do not find any problem, connect them back and do a restart of your computer.

Update BIOS:

Check BIOS settings for compatibility of the motherboard which you are using and update the BIOS to the latest version available. It will help determine if there is something wrong with the system hard drive controller, primary memory, or sockets that need to be updated.

Update Drivers:

Update your drivers according to its manufacturer’s website. If it does not give an answer then update it further by downloading them from trusted sites like Microsoft online websites and the official websites of OEM.

Run Hardware Troubleshooter

Run the ‘Hardware and devices’ troubleshooter by pressing WINDOWS + R. Type msdt.exe -id DeviceDiagnostic in the Run command, and click on OK or press enter.

Now press Next

After clicking on ‘Next’, follow the on-screen instructions to run the troubleshooter and select the appropriate response when prompted to complete the troubleshooting process.

Once done, check if the ‘Critical Process Died’ error has been resolved if any issues were found and resolved.

If not, do not worry, it is time to move to the next method

Perform the Clean Boot

Here is another solution for you to deal with the critical_process_died in windows 11.

At first glance, if you have to try this method, it appears challenging to deal with the problem. So try this only after you have tried all other windows 11 critical process died fixes.

So get ready to find out about the perform the clean boot process to fix the issues windows 11 critical process died loop. So follow the steps mentioned below.

Steps:

  1. First, you need to log in to the Personal computer or Laptop as administrator.
  2. After that, there is the search option present adjacent to a Win Icon on the taskbar. Click on it and Type the following command: “MSConfig” and choose the option System configuration. critical_process_died_windows_10
  3. Once you click on the system configuration, open the Service tab from the top menu. After that, choose the Mode all MicrosoftServcies and select the option Disable all.windows 10 critical process died
  4. Once you have done, it hit on a Startup and go to the Task Manager,
  5. Under a Startup in the Task Manager, for every startup thing, choose the thing and choose Disable option.
    windows-10-critical-process-died
  6. After that, you need to Close your Task Manager, and click on OK in the System Configuration. Next, you have to restart the computer or laptop.windows_10_critical_process_died

So, performing the steps mentioned above will allow the computer to boot into Windows 11.

Once you boot, you can perform various functions here and find out the culprit, which is causing the windows 11 critical process to die. If a problem persists after the system update or the installation of a new driver and before this system was performing fine, the best way to deal with it is doing a system restore to an existing state.

Let’s check the two ways through which you can perform it manually or automatically. 

So, here are the perfect methods to perform the restore function to fix the error critical_process_died windows 11.

Windows 11 Critical_Process_Died: Performing System Restore

Note: By doing a system restore, you will not lose any files like video, music, picture, etc. But remember, there are some applications that you installed that may not be present. System restore is reverting the laptop or Personal computer to the last point. To perform, the function needs to follow the steps mentioned below to fix the critical issue process died windows 11.

  1. First, you have to choose the search icon present at the start button and enter the command. Create the restore point.windows 10 critical process died no safe mode
  2. Once you have done this, open system properties.
  3. After that, choose the System Restore in the system properties.
  4. Click the result to open System Properties.
  5. After that, hit the System Restore button in the System Properties.
  6. The new dialog window box would appear with the title “System Restore” option and click next.windows-10-critical-process-died-no-safe-mode
  7. Choose the option to restore option that you like to use on your Personal Computer and laptop. You can also pick the option to Scan for the affected programs. It is done to find out about applications that no longer exist.
  8. Once you have done this, hit the option Next and complete the process by clicking finish.

After performing, the steps mentioned below the laptop or PC would start work from the last point. By doing this, your computer does not have the critical issue process died windows 11, and your System works perfectly.

Is System restore not working?

If the system restore proceeds do not work, then do not worry. You have to perform the steps to boot the computer into the clean boot or Safe boot. You can also try restoring the previous points to execute the System Reset.

Fix the Critical Process Died Windows 11: System File Checker

The windows 11 critical process died issues could be due to any corrupted system files. To deal with such issues, you have the SFC that is system file checker software. It allows you to look for the corrupted data in the system and fix them to their perfect state.

This software searches for all documents and files that come under the WRP. WindowsResource Protection prevents registers, folders, and file modifications that are an essential part of your operating system. 

For this, you need to perform the following functions:

  1. hit on the search option present at Window Icon and enter the command “Command Prompt.” after that, click on the option Run as the Administrator. This command opens the new windows on the screen.
  2. IN the original command box, enter the command sfc /scannow‘ it must be without any quotes. After that hit the option Scan now.
  3.  By doing this SFC will look for the corrupted files and repair them. The windows will say Windows Resource Protection found corrupt files and successfully repaired them.

Details are included in the CBS.Log windir\Logs\CBS\CBS.log. For example C:\Windows\Logs\CBS\CBS.log. 

Once you have done this restart the Computer.

Last Words

We did our best to solve your problem of Critical Process Died Windows 11 and found the best ways for you to fix it. Now it’s your time to help us to reach more peoples who face this and you can do this by sharing this article. In the end, thank you very much for reading this complete article.

Leave a Comment