Hey is your window 10 stuck in windows 10 automatic repair loop issue? It has been two days that you are unable to fix the issues and looking for some reliable solutions. Here are some questions
Have you done anything differently while restarting your PC?
NO.
When you open the PC, your screen is showing an automatic repair loop window?. After then it automatically rebooted and went into the automatic repair loop window 10.
If you are suffering these issues, then do not worry because we have the right solution for you.
2 Steps Of Solution Windows 10 Automatic Repair Loop Issue
There are two types of scenarios when it comes to the windows 10 automatic repair loop 2019. So depending upon the situations the solution to these issues is different
Black Screen
Blue Screen
Scenario One Of Windows 10 Automatic Repair Loop
If your monitor screen turns black or stuck at preparing automatic repair loop windows 10 no need to panic because here are the solutions. So it makes you unable to use the function like “built-in repair.” So in such cases, you need a Window Installation Media help. Here are some solutions for you.
Number 1.Perform The Hard Reboot
Whenever your laptops are not responding to any command, you need to perform the hard reboot. It is the Method or restarting the PC manually. In this, you do not use any soft resets or the operating system. Performing the hard reboot for automatic repair loop windows is ready. Hold and press power on a laptop. Wait for a few seconds because it takes some time to shut down the PC. After doing this, restart your Laptop and check for any issues.
2nd Method: Reset or Restart Pc

The best Microsoft solution to the windows 10 automatic repair loop 2019 is to reset or refresh the Personal Computer directly because your laptop enters into the reboot mode.
According to Microsoft, you need to hold and pee the power button of the PC. It would be best if you did this 3 times forcefully because by doing this system will enter the repair boot. When you come in troubleshoot popup window, choose the option to troubleshoot. After that pick the restart and reset. If you still fail to do this, then switch to the next Method.
3rd Method:

If your laptop is stuck and showing the message windows 10 automatic repair loop on the laptop. Here is one more solution for you. it would be best if you did windows reinstallation via DD /CD because it is necessary when the display is black. Once you enter the CD, you enter in the SAFE MODE/.
Step1: first you need to connect the Installation Media to your computer.
Step 2: After that, select the boot from a window installation media from your screen.
Step3. Wait for a few minutes because at that time file loads.
Step 4: In your window setup, press the option “NEXT.”
Step 5: In Setup Window pick the option
- Repair your computer
- Troubleshoot
- Advanced option
- Startup setting
Step 6: After that, you need to pick the Safe mode to enter.
4th Method:
If any system files are damaged or missing from the computer it might be the reason for windows 10 automatic repair loop. Do you know the window offer the Checker tool?it allows users to find out and repair the corrupted and missing system files. For this, you again require the installation.
Step 1: for this, you need to connect the Installation Media to a Laptop or computer.
Step 2: You need to pick a boot from it. Again wait for some minutes.
In step 3:
In your Window set up, pick the option “NEXT”.
Step 4: Pick
- Repair your PC
- Troubleshoot
- Advanced option
- Command prompt
Step 5:
After that type the “sfc/scannow and press the button enter. Exit from that window and restart your laptop or computer.
Method 5:
Bootrec is the tool that will help you with the window 10 automatic repair loop. The other name for this tool is bootrec.exe.utility. The Microsoft office provides these tools in a Windows Recovery Environment. So here the few steps by which you can fix the issues by using Bootrec
Step 1: Same as step 1,2,3, and 4 of method 4
Step2: you need to enter the lines mentioned below in Command Prompt.
bootrec /fixboot, bootrec /scanos, bootrec /fixmbr , bootrec /rebuildbcd
Exit
Step 3: You need to restart the PC.
6 Method: Disable Windows 10 Automatic Repair Loop
There are chances that automatic repair is the culprit. The best thing is to disable the automatic command repair. Here are some steps that you need to follow:
Step1: read step one of method 4
Step 2: same as Method 4
Step 3: same as the last method
Step 4: Same as Method 4
Step5: enter the bcdedit /set {current} recoveryenabled No. in command prompt. Exit.
Step 6: restart
7th Method: Extend a System Partition
Some items there are not enough space to perform the command because your PC drive is almost full and faces the issues like preparing automatic repair loop windows 10. To deals with these issues, you need to create some space. Use the extend a system partition tool on your pc.
Scenario TWO:

Is your windows screen turns blue this time? Unlike scenario one, you do not require any Installation Media because you can see the advance option. In this, you can see the advance option on the laptop screen.
1st Method: Restore Window

Step 1:
Pick the “Advanced Option” on a blue screen and select the
- Troubleshoot
- Advanced setting
- Command Prompt
Step 2: you need to select the account and type the password.
Step 3: enter C:
CD Windows\System32
CD config
DIR
CD regback
DIR
CD..
REN default default1, ren sam sam1, ren security security1, ren software software1, ren system to system1
CD regback
copy * c:\windows\system32\config, in Command Prompt
Step 4: after type “exit.” in a ” Choose an option” window. Pick turn off the option. After that restart the PC.
2nd Method: system restore
Have you created the restore point before the window 10 automatic repair loop issues? If yes then you can go for the restore option.
1s step:
Select the following option
- Advanced options in a blue window
- Troubleshoot
- Advanced option
- system restore
Step 2 Pick the resort point
Step 3: wait for a few minutes because the restoring process is running at the back.
3rd Method: Image Recovery

Have you created the system image on the external device before issues like automatic repair loop windows 10? If yes, then go for the System Image Recovery method because it is one of the simple methods.
Step1:
You need to connect the external device on which you stored the image to the pc.
Step2: select the
- Advanced option
- Troubleshoot
- Advances option
- System image recovery
Step 3: Select the System Image recovery
Step 4: then Re-image the computer wizard
Step 5: Restart the pc.
4th Method: Early launch Anti-malware Protection
If you are still facing the issues “windows 10 automatic repair loop” then disable anti-malware protection. You can perform it from the Command prompt options in the window boot menu’s options it will appear once you return the PC several times.
Step 1: Select the option
- Advanced option
- Troubleshoot
- Advanced options
- Startup settings
After your PC will restart and show multiple options.
Step 2: disable the early launch anti-malware protection.
Step 3: Restart the PC.

Conclusion
If you are unable to fix the Windows 10 Automatic Repair Loop issues. Then reinstalling the Windows 10 is the last option. People avoid reinstalling it because it erases all of your data and files. Mostly most of the user fixes the issues by using mentions mentioned above. To avoid data loss, always recover the data before reinstallation.
Leave a Reply